CN EN

PRODUCTS CENTER

Product Centre
Return home Product Centre
YE-C series motors for compressors

YE-C series three-phase asynchronous motors for compressors are a series of high-efficiency and energy-saving three-phase asynchronous motors specially developed by our company in accordance with the characteristics of compressor use. Covering IE3 to IE4 energy efficiency classes, the energy efficiency classes conform to the energy efficiency regulations of GB 18613-2020 on Energy Efficiency Limiting Values and Energy Efficiency Classes for Electric Motors

 

1)Low noise, low vibration and strong ventilation capacity of the motor

2)The motor insulation system is divided into class F, class H and special insulation system for frequency conversion to ensure the service life of the motor/p>

3)The Operating system of the motor is S1, the cooling method is IC411, and the protection level of the shell is IP55 or IP56.

4)Short starting time, high starting torque and overload capacity to meet the characteristics of compressor use

5)Low temperature rise, high reliability, high efficiency, energy saving, safety, environmental protection, beautiful appearance

6)Frequency conversion motor has high speed regulation accuracy, wide range of speed regulation, small vibration, easy to achieve a variety of automatic control, etc.

7)The bearings are lubricated with high temperature, with higher reliability.

  • Operating conditions
  • Technical parameters
  • 1)Temperature: ambient air temperature varies with the season, but the maximum is +46℃, the minimum ambient air temperature is -15℃

    2)Altitude: not more than 1000m Note: When the ambient air temperature and altitude are different from the above provisions, according to IEC60034-1

    3)Altitude: not more than 1000m Note: When the ambient air temperature and altitude are different from the above provisions, according to IEC60034-1

    4)Rated frequency:50Hz

    5)Operating system:S1

    6)Rated voltage: 380V

    7) Service factor: 1.2

     

    Note: If there are special requirements for frequency, voltage, ambient air temperature, altitude, etc., please put forward when ordering

  • Block number

    80~355

    Rated voltage

    380V

    Power

    0.75kW~315kW

    Frequency

    50/60Hz

    Number of poles

    2/4/6p

    Energy efficiency class

    IE3/IE4/Variable frequency

    Operating system

    S1

    Protection class

    IP55/IP56

    Insulation class 

    F/H special insulation system

    Insulation class 

    IC411
Return